Do pond weeds stop growing during the winter months? | Ponds & Lakes Q&A

25 Nov

Q: Do pond weeds stop growing during the winter months?

Q: Do pond weeds stop growing during the winter months?”

Allen – Marcola, OR

A: Unfortunately, it’s tough to give you a definitive answer. The growth pattern of aquatic weeds and algae really depend on where a particular pond or lake is located. Weed growth in a Florida pond, for instance, will be different from weed growth in a Minnesota pond!

In general, however, you can expect to see different pond weeds pop up at different times of year based on environmental temperature, just like the weeds in your lawn. If your pond or lake freezes over, the perennial weeds will typically die back in the winter and re-emerge in the spring. Some plants, however, will continue to grow throughout the cold season, though at a much slower rate than you’d see in the warmer summer months.

Trouble surfaces when water temperatures drop to the point where your algaecides and herbicides become ineffective – but the weeds continue to grow. Algae Defense®, for example, stops working when the water is below 60° Fahrenheit, and the beneficial bacteria in PondClear™ slow down when temps fall below 50°F.

So what can you do?

When the chemicals and bacteria are no longer working for the winter, it’s time to turn to Pond Dye. An effective year-round treatment, Pond Dye shades and beautifies the water regardless of the temperature or time of year.

Pond Dye comes in easy-to-use packets and  liquid. To use the packets, simply toss several in water at various locations around your pond or lake. The packet will dissolve and the dye will disperse throughout the water. To use the liquid, pour the dye in several spots along the pond’s edge. There’s no mixing required.

Pond Talk: Do you battle weed growth year-round where you live?

Protects All Year, No Mixing Required - The Pond Guy® PondShade™ Pond Dye

 

Enjoy this article?
Join over 60,000 fellow pond owners and receive our Weekly Pond Talk every Saturday.

 


I thought I did a successful chemical treatment, but why are the weeds coming back? | Ponds & Lakes Q&A

15 Jul

Q: I thought I did a successful chemical treatment, but why are the weeds coming back?

Q: I thought I did a successful chemical treatment, but why are the weeds coming back?

Barney – Andalusia, AL

A: Treating weeds is a tricky task. Despite dosing them with aquatic herbicides to clear your pond or lake of plant pests, they seem to grow back over and over again. It seems like a never-ending cycle! Why does this happen?

Well, chemical treatments have their benefits and drawbacks: On one hand, they work great as a quick fix to decimate actively growing weeds. But once those plants die, they become a food source for future weeds and algae, acting as a fertilizer for the very things you’re trying to get rid of. The herbicides do nothing to prevent future growth, and so you’re left with yet another growth spurt of pond weeds, which you’ll then treat with chemical herbicides – and around you’ll go again.

So how do you break the cycle? Here is a four-step approach that will help put an end to it.

  1. Remove the Dead Weeds: Once the weeds have browned, use a Pond & Beach Rake or PondSkim™ Debris Skimmer to remove as much dead material from the water as possible. This prevents dead plant material and muck from accumulating and fertilizing future weed growth.
  2. Be Proactive: Debris will still find its way into your pond, so add some beneficial bacteria to the water to manage the excess nutrients before they feed your weeds. The products found in the ClearPAC® Plus Pond Care Packages – including PondClear™ and EcoBoost™ for suspended debris, and MuckAway™ for accumulated bottom-of-the-pond debris – naturally break down that organic material.
  3. Add Aeration: If you don’t have one already, install a Airmax® Aeration System that’s sized for your pond or lake. By circulating and adding oxygen to the water column, the beneficial bacteria will thrive. In turn, they’ll eat through even more debris and prevent weed and algae growth.
  4. Shade and Color:  Pond Dye is another offensive tactic in your battle against aquatic weeds. Pond dye shades the water, preventing ultraviolet light from reaching the plants.

Throughout the spring and summer, weeds will grow. But with some pond management practices, you can keep those pesky plants to a minimum.

Pond Talk: How often do you treat your pond or lake for weeds?

Skim Dead Algae & Vegetation - The Pond Guy(r) Pond & Beach Rake

 

Enjoy this article?
Join over 60,000 fellow pond owners and receive our Weekly Pond Talk every Saturday.

 


We just bought a house with a half-acre pond. Where do we start? | Ponds & Lakes Q&A

1 Jul

Q: We just bought a house with a half-acre pond. Where do we start?

Q: We just bought a house with a half-acre pond. Where do we start?”

Hans – Brandon, MS

A: Some home buyers look for granite countertops or in-house movie theaters – but a half-acre pond is an amenity that makes us giddy! Because you likely don’t know the history of the pond, how it was built or how it was maintained, it’s best to give that new pond a complete rehab from the bottom up so you can use it to its full potential.

Here’s a five-step process that will make the job easy:

  1. Assess the Pond’s Condition. Before you begin rehabbing your pond, take some time to examine it, including measuring its size and depth, identifying weeds and beneficial aquatic plants, checking for fish, and inspecting pre-existing structures like a dock or an aeration system. These details will help maintain your pond or get it back into shape.
  2. Give It an Oxygen Boost. Your real work begins with installing a bottom-diffused aeration system, like one of the Airmax® Aeration Systems. The units, which include a diffuser, compressor and airline, circulate oxygen throughout the water column so that it’s readily utilized by critters living in your pond, including fish, frogs and beneficial bacteria. It also helps remove harmful gases from the water. If your pond already has an aeration system, thoroughly inspect all its parts and tune them up as necessary.
  3. Control Weed Growth. Treat prolific growth of aquatic weeds and algae. Invasive plants like cattails, chara, phragmites, bulrush, watermilfoil and even out-of-control water lilies can become real problems in a closed ecosystem. Depending on your situation, you may need to use an herbicide and/or algaecide to get them under control before they take over and negatively impact your water quality. For help, check out our Weed Control Guide, which can help you ID and choose the right remedy for the weed.
  4. Remove Unwanted Vegetation. Before and after you treat the weeds and algae, mechanically remove growing and dead vegetation with a Weed Razer™ and Weed Raker™. If you don’t pull that growth out of the water, it will break down into detritus and pond muck, which will actually fertilize the weeds and algae you’re trying to eliminate!
  5. Do Your Maintenance Chores. Now that your pond is on its way to being clean, clear and usable, keep it that way by maintaining it with beneficial bacteria and pond dye. Beneficial bacteria, like those found in ClearPAC® PLUS Pond Care Package, will break down any residual pond muck buildup and keep the water clear. Pond dye will tint the water blue or black, preventing ultraviolet rays from reaching problem plants like algae while adding beauty to your waterscape.

With a little work, you can transform your new pond into a dramatic part of your landscape – particularly if you decide to add a decorative fountain or other feature to it. Have fun with your new aquatic playground!

Pond Talk: What advice can you share with new pond owners?

All-In-One Pond Care Package - Pond Logic(r) ClearPAC(r) Plus

 

Enjoy this article?
Join over 60,000 fellow pond owners and receive our Weekly Pond Talk every Saturday.

 


I think I have either milfoil or coontail. How do I tell the difference, and what chemical should I use? | Ponds & Lakes Q&A

17 Jun

Q: I think I have either milfoil or coontail. How do I tell the difference, and what chemical should I use?

Q: I think I have either milfoil or coontail. How do I tell the difference, and what chemical should I use?

Paul – Greenfield, OH

A: Invasive aquatic plants like milfoil and coontail can cause trouble in your pond or lake. Though they provide food and shelter for birds, insects, fish and other pond critters, they can form dense colonies, reducing access to open water, limiting fishing access, and interfering with boating and swimming.

Milfoil and coontail look similar and – thankfully – can be treated with similar chemicals. Here’s what you need to know about identifying and managing these nuisance plants.

Milfoil Identification

When you think milfoil, think feather-like.

Many different species of milfoil and watermilfoil exist in North America. In general, milfoil is found in water that’s less than 20 feet (6 meters) deep. In water less than 15 feet (4½ meters) deep, it can form dense mats over the surface. The plant is comprised of long stems with air canals and flat, feather-like, whorled leaves that are pinnately divided.

Milfoil is an important food source for waterfowl, but these nuisance plants can aggressively invade lakes, ponds and waterways. Once they’re established, they’re almost impossible to eradicate, and so periodic maintenance is necessary to keep them under control.

Coontail Identification

When coontail comes to mind, think of a Christmas tree.

Also known as hornwort, coontail also thrives in water less than 20 feet deep. The rootless invasive plant grows below the surface, and it has a central hollow stem and dark green leaves that are spiny, forked and bushy near the tip, giving it its “coontail” or Christmas tree appearance.

Like milfoil, coontail provides food for waterfowl and cover for young bluegills, perch, largemouth bass and northern pike, but it needs to be managed to prevent it from taking over your pond or lake.

Keeping Them Under Control

Many of the submerged weed chemicals available treat both milfoil and coontail. Depending how you use your pond, the best choices are:

  • Ultra PondWeed Defense®: This liquid herbicide has short-term drinking (three days for human consumption; one day for animal consumption) and irrigation restrictions (five days).
  • Navigate: A granular herbicide, Navigate is great for spot-treating problem areas. It has longer consumption and irrigation restrictions (21 days) than the others.
  • Fluridone (Sonar™): If your entire pond is infested, try Sonar™. It can kill the invaders down to their roots, but expect slower results (it can take up to 90 days for full protection) and longer irrigation restrictions (30 days). Note: Sonar™ should only be used in ponds with little to no flow.
  • Clipper™: To use Clipper™, you’ll need to mix the quick-dissolve granules with water – but you can start using the water again for irrigation in just five days.

Regardless which one you choose, the best time to apply it is when the weeds are actively growing.

Help from the Experts

If you can’t figure out which aquatic weed is growing in your pond, pull one (or more!) from the pond, snap a picture and email it, or mail us a sample in a dry paper towel. We can help you identify the invader and suggest the best chemical to control it.

Pond Talk: What’s your go-to herbicide to treat invasive aquatic plants?

Broad Spectrum Pondweed Control - Pond Logic® Ultra PondWeed Defense®

 

Enjoy this article?
Join over 60,000 fellow pond owners and receive our Weekly Pond Talk every Saturday.